Headed Press Fit Drill Jig Bushes
Boneham range of Headed Press Fit Drill Bushes . This range of drill / jig bushes is similar to the PP range, but for the head. The headed drill bush type contain a ‘top hat’ or ‘shoulder’ at the top of the bush to allow greater axial force, so not to slip out the plate, and aids where it is desired, to feed down to a dead stop. The head of the bush also allows it to be pressed into the plate easier and can be left either exposed above the plate surface or counterbored to sit flush. These bushes are denominated by the PH reference for metric drill bushes and S for the imperial bush.
- Imperial and metric
- DIN 172A | ISO 4247 | BS 1098
- Specials Manufactured
- The UK's Largest Inventory
41 product(s) found - Click the item to go to the product page or simply select sizes
Do you want to add the selected products to your shopping basket?
Due to changes to the product list you will lose the selection.
No further filters for this item. Click the products to go through to the main product page. View images, descriptions and download catalogue pages and CAD files.