Ph Type Headed Metric Jig Bush Iso 4247 | Din 172A | Boneham & Turner

Welcome to the new Boneham site. If you have an account with us and are shopping on the new store for the first time, please reset your password here

Register
Account
Sub Total: £0.00
View Basket Checkout

Ph Type Headed Metric Jig Bush Iso 4247 | Din 172A

Metric Headed Drill Bushes or Headed Metric Jig Bushes are dimensionally the same as the plain press fit bushes but feature a head (top-hat or shoulder). The head of the drill bush can be counter bored into jig if a flush finish is still required. The benefit of using a headed bush is that they can cope with great axial forces. Drill bushes can also be used for the accurate alignment of workpieces or composite mould tools, accurately accepting location or alignment pins.

DIN 172A | ISO 4247 | F7 Bores | n6 OD's | ID's 0.9mm to 59mm

Loading please wait

Select up to 3 products to compare

Select up to 3 products to compare Compare

Terms and conditions agreement

Please read our Terms and Conditions & Privacy Policy.*

X