Boneham Black Dowels
Code: BAD
Boneham Black Plastic Dowels
Boneham Black are plastic dowels offering superior integrity and performance to standard nylon dowels. Manufactured from engineered co-polymer black plastic. Strong rigid and tough with good impact strength.
These performance plastic dowels have outstanding wear resistance and sliding properties for reusability resin removal and workability. Boneham Black dowels are precisely machined to accurately locate and align composite moulds.
Featuring chamfers on both ends of the pin to easily insert into the location point usually a bush saving time and reducing binding. The properties of the co-polymer material ensure performance in normal autoclave conditions during curing. Machined to suit Boneham Polygrip GS bushes if the dowels become locked by resin run they can easily be drilled out without damage to the mould or location bush.
Why are Boneham Black Dowels considered Performance?
-40°C to 140°C temperature range (140°C being the maximum short term service temperature). Low moisture absorption rates Improved Dimensional stability Black finish has increased UV resistance Greater tensile strength than nylon Increased surface hardness
What tolerances are Boneham Black dowels machined to?
Diameters 1.5mm – 5.9mm +/- 0.01mm 10µm 0.0004" Diameters 6mm and above 0 to + 0.02mm 20µm 0.0008" Length +0.01mm
- -40°C to 140°C temperature range
- Improved dimensional stability
- Greater tensile strength than nylon
- Diameters 1.5mm – 5.9mm +/- 0.01mm, 10µm, 0.0004"
- Diameters 6mm and above 0 to + 0.02mm, 20µm, 0.0008" Length +0.01mm
| Material | Co-polymer black plastic |
| Finish / Colour | Black |
| Tailoring Options | Diameter, Length, Colour (Blue & White) & to Customer Drawing |
| Manufacturing Standard | Boneham Standard |
| Metric or Imperial | Metric |
| Standard Size Range | 2.5mm - 12mm |
| Parent Item Code | BAD |
| Included | Boneham Black Plastic Dowels |
- Your price £0.00